Novastar VX400
The VX400 is NovaStar's new all-in-one controller that integrates video processing and video control into one box. It features 4 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX400 unit can drive up to 2.6 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens.
The VX400 is capable of receiving a variety of video signals and processing high-resolution images. In addition, the device features stepless output scaling, low latency, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.
What's more, the VX400 can work with NovaStar's supreme software NovaLCT and V-Can to greatly facilitate your in- field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.
Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX400 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.
Input connectors:
- 1x HDMI 1.3 (IN & LOOP)
- 1x HDMI 1.3
- 1x DVI (IN & LOOP)
- 1x 3G-SDI (IN & LOOP)
- 1x optical fiber port (OPT1)
Output connectors:
- 4x Gigabit Ethernet ports. A single device unit drives up to 2.6 million with a maximum width of 10,240.
- 2x Fiber outputs
- OPT 1 copies the output on 4 Ethernet ports.
- OPT 2 copies or backs up the output on 4 Ethernet ports.
- 1x HDMI 1.3. For monitoring or video output.
- Self-adaptive OPT 1 for either video input or sending card output. Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
Audio input and output
- Audio input accompanied with HDMI input source
- Audio output via a multifunction card
- Output volume adjustment supported